RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 678 ONLINE 20 EVENTS SEARCH REGISTER  START HERE
 
2 pages [ <<    <     1     ( 2 )    >    >> ]5923 viewsPOST REPLY
E-flite . Fast Lad Performance . Ace Hobby

.
.
e-E-Flite Blade MSR CP CX MCX 400-3D > E-flight blade and Futaba Radio
 
 
blueline
Heliman
Location: Eastern NC

My Posts This: Topic  Forum

Thanks rbiasi,

That helped me. I am fine tuning now. I will post my final setup when I get it right for others to use.

Jim
08-28-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Nasscar][
Veteran
Location: Delaware

My Posts This: Topic  Forum		has anyone setup their blade on a 14mz?
09-20-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
pkh
Heliman
Location: Emmaus, PA

My Posts This: Topic  Forum		I think anyone who could afford a 14MZ would buy a better heli than the Blade...



Paul
Two Raptor 50V2s
JR Venture 30CP
Two Shoguns
Blade CP
09-20-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
c mark smith
Senior Heliman
Location: Mt Vernon, Indiana

My Posts This: Topic  Forum		You might spend more oney, but better ?????/

Not !
09-20-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
Nasscar][
Veteran
Location: Delaware

My Posts This: Topic  Forum		Actually I bought this heli on impulse. There is a Radio Shack near where I live that sells r/c items. I walked in and seen it and couldn't leave without it.

I have tried selling it but with less than 4 flights I couldn't except less thand $160.00. So with that being said I just upgraded the battery to lipo 1320 and just ordered the direct tail mod. And now i'm looking for a better motor than the stock or the performance one.

Might as well enjoy it. . It's paid for. Yeah!
09-20-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
ElderEagle
Heliman
Location: Summerville, SC

My Posts This: Topic  Forum		[size=large]ribasi
I stumbled upon your posting of Aug 27 '05. Since I had just bought a Futaba 7C for my HB CP2, I found it very helpful. (I've just recently got into this RC stuff.) I did find that I had to change the AIL setting in the SWASH AFR to a "-" 65% as opposed to a "+".

Have you made any other refinements to your 7C settings for the Honeybee that you might share?
02-24-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Sparky01
Heliman
Location: Denver, CO

My Posts This: Topic  Forum		Question about the 7C

I am looking for a new Heli Radio and am now to helicopters.

In reading about the 7C, Ifound:

"The 7Cs big weakness in helicopter programming is that it has just one knob so the user has to switch back and forth in the programming to use hovering pitch and hovering throttle."

Does this mean while hovering I need to switch back and forth, or while programming this feature I need to switch back and forth, but once it is set IT IS SET?

Also what would be the advantages of going with more channels than 7? I hsut want to buy one radio.

OK one more what are the settings for a 7CHF or are they about the same as the 7CHP

Thanks,

Sparky01

Gravity is not just a good idea, it's the law.
02-25-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
robertbyrd
Heliman
Location: Houston, TX

My Posts This: Topic  Forum		Tail Rotor

I am setting up a Blade with afetrmarket electronics, GWS R-6NIIH, GWS PG-03 Gyro, Align brushless, GWS ICS50E ESC for tail motor and a T9CHP Futaba radio and the tail rotor runs with these setups, I can mke it stop, but it requires all of the subtrim and stick trim the radio has to get it working. the gyro is centered and working properly, and I have the same problem even when I bypass the gyro. I am plugging the gyro/tail esc into the #4 rudder port and not the #5 gyro port. Any help would be appreciated.

I don't consider myself to be a complete idiot, but this one has me bumfoozled...

Thanks,

Robert Byrd
AtomicMods.com
03-08-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Gary Hoorn
Key Veteran
Location: Annapolis Maryland USA

My Posts This: Topic  Forum		Sparky01,
Quote 
Does this mean while hovering I need to switch back and forth, or while programming this feature I need to switch back and forth, but once it is set IT IS SET?

I fly mine with a 7CHP and the Knob is Inhibited! I don't use it on any of my Helis. There are many posts here in the Forum on how to setup a 7 on an Bee or Blade. A bit of searching will find them for you.
Gary

http://www.runryder.com/helicopter/t225193p1/
03-08-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
SargentMajor
Heliman
Location: West ISlip, NY United States of America

My Posts This: Topic  Forum		blade cp and futaba radios

I'm dying to try the same thing only with a 7c system only no one in my neighborhood seems to know if the stock reciever in the cp is single or dual conversion it makes a big difference if you put the wrong xtl in the reciever, so does anyone know single or dual conversion? The ability to add expo will tame the twitches alot, even though parts are cheep after a while at 18 bucks a crash it adds up.
Sargentmajor
03-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
SargentMajor
Heliman
Location: West ISlip, NY United States of America

My Posts This: Topic  Forum		blade cp and futaba radios

I'm dying to try the same thing only with a 7c system only no one in my neighborhood seems to know if the stock reciever in the cp is single or dual conversion it makes a big difference if you put the wrong xtl in the reciever, so does anyone know single or dual conversion? The ability to add expo will tame the twitches alot, even though parts are cheep after a while at 18 bucks a crash it adds up.
Sargentmajor
03-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
scoyle
Senior Heliman
Location: IL

My Posts This: Topic  Forum		The stock 4-n-1 contains a single conversion receiver.

--Scott
03-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Gary Hoorn
Key Veteran
Location: Annapolis Maryland USA

My Posts This: Topic  Forum		Sargentmajor,
A Futaba single conversion crystal, the one with the Black and White channel identifing tag, works in the Blade. I fly mine with a 7CHP using one of those crystals. This crystal is also called the "short" crystal by some vendors.
Gary
03-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
slider46
rrProfessor
Location: Gloversville, NY

My Posts This: Topic  Forum		And it will work with any crystal on the same channel as the tx. You just have to make sure if you have a low band rx you need a low band tx....

Tom..... No "D" flying....
03-10-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
2 pages [ <<    <     1     ( 2 )    >    >> ]5923 viewsPOST REPLY
Esprit Model . Thunder Power RC . Mikado Modellhubschrauber

.
.
e-E-Flite Blade MSR CP CX MCX 400-3D > E-flight blade and Futaba Radio
 Print TOPIC Advertisers 

Subscribe to This Topic

Sunday, November 8 - 12:51 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF