RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 863 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page865 viewsPOST REPLY
Experience RC . Heli-Max . Hobby Hut

.
.
HIROBO Turbulence - SDX - Freya - Sceadu > Nicer Landing Gear for Sceadu?
 
 
Ensonic
Senior Heliman
Location: GERMANY, Stuttgart

My Posts This: Topic  Forum
Hi,

I am searching for a nicer (wider, deeper) landing gear fpr my evo. Which one fits nice? Does the Freya gear fit? If so, which order # do it have...
05-10-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
ornatep
Senior Heliman
Location: San LUis Obispo, CA USA

My Posts This: Topic  Forum
gear

I used some of heliproz mavrikk gear very affordable and have the same footprint as min air, nice and wide, good luck
05-10-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
tjn
Senior Heliman
Location: Paris Crossing, IN

My Posts This: Topic  Forum
The old X-Cell gear for the 46 graphite would be good. White struts are p/n #3933 and black are p/n #3935, you would need two. Skids are p/n3936-2 for silver (30 size) and black are p/n #3936-1 (two also). The struts are the same size for all the MA heli's. The skids are shorter for the 30/46 size ships, but I use the small skids on all my helis including the 90 size ships.

Tom
05-10-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
pilotError
Key Veteran
Location: Long Island, NY

My Posts This: Topic  Forum
Two Choices

The best two choices are

Freya Low Rider gear (newer style Freya) - They bolt right on and look great. I have pictures in my gallery with the Freya gear on it.

MA Tuff Strut II's - these have to be drilled, but they are very wide (used on the fury) and look great. Lower than the stock gear and will survive many crashes.

Can't go wrong with either one.

Mike...

Good Judgement comes from Experience. Great Judgement comes from Bad Experience.
05-10-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
AndyH
Key Veteran
Location: San Diego, CA

My Posts This: Topic  Forum
My vote goes for the Freya gear! The look really really good on a sceadu!

05-10-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
mrNoodles
rrProfessor
Location: Borlänge, Sweden

My Posts This: Topic  Forum
Same as Andy

Freya gear
05-10-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
thebignickey
Senior Heliman
Location: Marietta, GA

My Posts This: Topic  Forum
just boil and spread the ones it came with have a look at mine i think it is just right and you cant break them
05-10-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Leif
Elite Veteran
Location: Oxford, PA - USA

My Posts This: Topic  Forum
I'm using Mavrikk Supergear as well. Low profile, tough as nails and only $13 a set.



You do have to drill them to fit the Evo.

Leif
05-10-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
SolarXtreme
Veteran
Location: Arroyo Grande, CA

My Posts This: Topic  Forum
MA makes Tuff Struts for .30 size helis.

3913 Tuf-Strut II - .30 Size Landing Gear Kit -- Black
3915 Tuf-Strut II - .30 Size Landing Gear Kit -- White

These are a nice set of skids for the Sceadu nice low profile.
.

I picked a hell of a day to quit drinking

Avant EFX
Freya EVO
05-10-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Patriot
Veteran
Location: Luton

My Posts This: Topic  Forum
Freya Landing gear is a direct replacement looks alot better order 0414-285 complete set with all the hardware required

Just smile
05-10-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Tmblewd
Veteran
Location: Phoenix, AZ

My Posts This: Topic  Forum
After reading this thread, I ordered the Freya skids for my EVO. What I want to know is if any of you that have put the Freya skids on your Sceadu's have cut down the aluminum skid lengths? And if so, about how much did you cut off them?
06-27-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
pilotError
Key Veteran
Location: Long Island, NY

My Posts This: Topic  Forum
Cut em down

The Freya skids are too long. I don't remember exactly how much I took off, I just made them look right. I think I have about 1 1/2 inches out the back.

Mike...

Good Judgement comes from Experience. Great Judgement comes from Bad Experience.
06-27-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
maller
Veteran
Location: PA

My Posts This: Topic  Forum
Kam Wyatt

http://www.kamwyatt.com/products.htm

I got them because of all the cool colors that are available.



06-27-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
AndyH
Key Veteran
Location: San Diego, CA

My Posts This: Topic  Forum
I use the original Sceadu skids in the Freya landing gear - that way I don't have to cut anything down and it works pretty well.
06-27-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Kinger
Elite Veteran
Location: Columbus, OH

My Posts This: Topic  Forum
AndyH is right on target. Just use the Evo skids in the Freya struts and you'll be in great shape. The Freya struts make the Evo look nice and agressive.
06-27-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Foxden
Key Veteran
Location: Port Charlotte, FL. USA

My Posts This: Topic  Forum
Tiger 50 with Neon Yellow gear.



Clyde Fox
Port Charlotte FL
Team Outrage
06-27-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
RCHeliJim
Elite Veteran
Location: Orem, UT USA

My Posts This: Topic  Forum
Quick UK sells some great landing gear as well!



Go Fly, Have Fun!!
-Team Quick UK
-Team RCHeliMag
06-27-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Alpine
Veteran
Location: Lexington, Ky

My Posts This: Topic  Forum
I like mine...

06-27-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
j911brick
Senior Heliman
Location: Republic of Texas

My Posts This: Topic  Forum
I use the quick UK neon gear. Tougher, wider, taller, and make the heli allot easier to see which is an issue with me.

james
06-27-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page865 viewsPOST REPLY
Heli Wholesaler . JR-Spektrum . E-flite

.
.
HIROBO Turbulence - SDX - Freya - Sceadu > Nicer Landing Gear for Sceadu?
 Print TOPIC Advertisers 

Subscribe to This Topic

Tuesday, November 24 - 1:26 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF