RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 404 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page417 viewsPOST REPLY
XHELI.COM . Autography FlightPower . Advantage Hobby

.
.
HIROBO Turbulence - SDX - Freya - Sceadu > Sullivan S613 Heli Extensions to soft for .90 size
 
 
sakowski
Heliman
Location: Poland

My Posts This: Topic  Forum		Hi

Watch out for S613 Hex Extention !!

I have got Freya 90 with OS 91SX + Pump System Kit.
After one day on heli field and 3 engine starts I have only Ball ( Hex shape gone - switch off ).
Hardened steel shaft with a 6 mm Hex Ball Driver is to soft for start my Freya 90.
I wrote about this probrem to Sullivan and this is answer:

Dear Sir,
This has come up with our last batch of Heli Extensions. We are looking into this problem and will get back to you as soon as we have an answer to why this happend.

Regards,
Sullivan

Now I will try Robbe (next after robbe K&S).
If you may any sugestion please write.

Thanks,
Grzegorz Sakowski
04-13-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
mrNoodles
rrProfessor
Location: Borlänge, Sweden

My Posts This: Topic  Forum		The K&S shaft seems to have some problems with their onewaybearings.
Robbe or Vario should be good.
04-13-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Jafa
Elite Veteran
Location: Sydney, Australia

My Posts This: Topic  Forum		I've had one of these S613 starter hex extensions with built in one way for 8 or 9 months now. I have three 90 heli's, done 120 flights in that time. In addition. many people at my club use my starter (due to high power battery and starter motor setup).

This item has given me zero problems, I really like it.




Protos | Logo 400 & 500 | Sceadu Evo | Freya Evo | Trex600N | Avant FX
04-13-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
z11355
rrMaster
Location: 10000 is enough time wasted.

My Posts This: Topic  Forum		you can purchase ONLY the 6mm 'rod' that is used on the Robbe.

It is hex on one end and ball on the other. 6mm width for the
full length (180mm). I don't know if it would fit the Sullivan
base.

S2676 - approx $6 USD (vs. $75 for the entire unit)

also, mcmaster.com has a rod ('blade') that appears to almost
identical for $2 USD
04-13-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Garry-Boy
Key Veteran
Location: Moscow, Russia

My Posts This: Topic  Forum
Quote 
The K&S shaft seems to have some problems

Augusto's grease mod solve all the problems in there.
check it here

Garry.
04-13-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
mrNoodles
rrProfessor
Location: Borlänge, Sweden

My Posts This: Topic  Forum		Doesnt seem to work so good on the newer shafts.

The earlier ones didnt have these problems.
04-14-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Garry-Boy
Key Veteran
Location: Moscow, Russia

My Posts This: Topic  Forum		Strange...I ripped mine two years ago, after that changed the bearing and it still lasts... occasionally all newer K&S starters which other guys bought here were OK???

Garry.
04-15-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
sakowski
Heliman
Location: Poland

My Posts This: Topic  Forum		Photo of destruction :(

04-18-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
medfoch
Senior Heliman
Location: Bay Village, Ohio

My Posts This: Topic  Forum		get a ROBBE Shaft. It is the best one I have seen - and It has been starting my c-spec/ps for 2 years.
04-18-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
olaf
Heliman
Location: poland

My Posts This: Topic  Forum		Grzegorz,

dlaczego nie kupisz sobie końcówki Hirobo?
Ja ja mam juz 2. sezon i wszystko jest ok.

Olaf

Olaf Align 600 NSP
04-18-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
1 page417 viewsPOST REPLY
Revolution Models . CarbonXtreme . Midland Helicopters

.
.
HIROBO Turbulence - SDX - Freya - Sceadu > Sullivan S613 Heli Extensions to soft for .90 size
 Print TOPIC Advertisers 

Subscribe to This Topic

Tuesday, November 24 - 8:03 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF