RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 862 ONLINE 82 EVENTS SEARCH REGISTER  START HERE
 
2 pages [ <<    <     1     ( 2 )    >    >> ]1185 viewsPOST REPLY
Ron’s HeliProz South . MTA Hobbies . Model Rectifier Corp

.
.
e-JR Vibe 500, Parkmite, Voyager-E > Pinions for 5mm shaft?
 
 
badbill
Heliman
Location: Centerville, Georgia

My Posts This: Topic  Forum

The pinion that came with mine for the stock brushed motor is a 14 tooth ( or was it 15? I'll count tonight. ) I have it on there now, but could barely tighten it because I already stripped the threads on one trying to get it tight. Maybe it will stay. Did anyone determine if the Quick pinions are 5mm and the correct pitch?

Bill Davenport
AMA 28141
03-11-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
ozace
Key Veteran
Location: melbourne, australia

My Posts This: Topic  Forum
Bill i have a quick ep 10 pinion on now. It is a 5mm hole and fits just right. The mesh is spot on .
03-11-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Ali92124
Senior Heliman
Location: San Diego, CA

My Posts This: Topic  Forum
I know this is an old topic, but I was checking out the rchover site and when I saw the 5mm pinion gears, it reminded me of this topic. Anyway, Here is the link incase someone is searching for 5mm pinion gears. I have no idea if these are the right pitch for VoyagerE.
http://www.rchover.com/brushless_motors

Look at the bottom of the page.
---
Ali

I dont need no stiiiiiinkin signature.
04-25-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
matt hogden
Senior Heliman
Location: Newcastle NSW Australia

My Posts This: Topic  Forum
Just purchased a Quick 10 EP 14 tooth pinion with 5mm centre and have been flying my VE. It cost $6 and works fine!
04-26-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Bushy
Veteran
Location: Tucson, AZ

My Posts This: Topic  Forum
I went the other way and turned my motor shaft down to fit the pinions.
Dave
04-26-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
2 pages [ <<    <     1     ( 2 )    >    >> ]1185 viewsPOST REPLY
Scorpion Power System . RCHover . HeliDirect

.
.
e-JR Vibe 500, Parkmite, Voyager-E > Pinions for 5mm shaft?
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, March 22 - 3:45 pm - Copyright © 2000 - 2010 runryder.com | email | link to rr | START HERE | NF