bobj
Veteran
Location: United Kingdom
My Posts This: Topic Forum | Hi
You wrote
-----------------------
don't like those new skids for cp and 3d. Canopy is sweet but i thought they will change more things like main frame. Those tailblades looks strange too...
-------------------
They did change the main frames, it is now made to accept the twister motor with out the need to cut the frame and they also changed the back of the frame so it now bolts on to the carbon plate rather than glues on.
The X 3D also has a new plate on the front of the frame which the battery clips on to verticaly to balence the model as the tail servo is mounted on the tail fin as standard now.
The X 3D has the following new parts compared to the Hornet 2}
New main frame, canopy, Ali tail drive rod, ball raced tail blade grips with a larger hub so bigger tail diameter, three bearings in each main blade grip, new auto unit, modified bell hiller unit, carbon fins, weighted main blades and finally a heim ball in the swashplate, plus the canopy on all models is ready finished including stickers in place.
It's also a little cheaper (at least in the UK) than the Hornet 2 kit as well as been higher spec.
Cheers
Bob J
MS UK. |
