RunRyder RC Helicopter Topic - CCPM metal swash by Align

RR Rated M For Mature

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 326 ONLINE 18 EVENTS SEARCH REGISTER START HERE

1 page

717 views

POST REPLY

Futaba-RC	.	Boca Bearings	.	XHELI.COM
	.		.

e-Align T-REX 250-450-500-600 > CCPM metal swash by Align

AeroSports
Senior Heliman
Location: NJ

My Posts This: Topic Forum

looks nice and the price is good.

http://www.align.com.tw/shop/produc...products_id=735

01-19-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE

Tom Viper
Senior Heliman
Location: SWEDEN

My Posts This: Topic Forum

17,5g!!!!

Wow, it´s even heavier then stock!

01-19-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE

AeroSports
Senior Heliman
Location: NJ

My Posts This: Topic Forum

I don't know how much the stock one weights. I think the elimination of the pitch control arm and aileron linkages will go to offset the extra weight.

I will get one and see if I can mill off some fat.

01-19-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE

martinic
Veteran
Location: NB, Canada

My Posts This: Topic Forum

The price of $3 US as mentionned in the post thread link is definitely overly-optimistic

. The stock swash sells for $10.50 US - the new metal ones will probably be at least $30 US; I guess we'll just have to see what the price is when the part becomes available.

01-19-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

genexis
Senior Heliman
Location: SG

My Posts This: Topic Forum

The price is out. US$34. Check the align site.

01-19-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE HOMEPAGE

3De
Senior Heliman
Location: Australia

My Posts This: Topic Forum

thier CCPM heli must be very close then, otherwise there is no point selling a CCPM only swash....

01-19-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE

Enright13
Senior Heliman
Location: Nottingham, England

My Posts This: Topic Forum

Yes. Also, judging by the fact that their swash has an anti-rotation pin, we can probably have a guess at the layout of their frame and servos.

I reckon that it will be similar to the CCPM mods that slot the servos directly into holes in the frame, rather than like yours and building a structure on the front then using the A arm to stop the swash from rotating. (I prefer your solution 3De)

Shame that half of any potential weight saving has been used up by making the swash out of lead, but it certainly LOOKS nice!

BCingU
En ];-)
"Oi! Who put THAT there?"

01-19-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

dnam
Veteran
Location: Herndon, VA - USA

My Posts This: Topic Forum

Quote
The price of $3 US as mentionned in the post thread link is definitely overly-optimistic

Martinic, he did not say $3, but said $3x which means you can substitute X for any number, in this case it turns out to be 2.40 (price on Align website is $32.40)

01-19-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE HOMEPAGE

Chaisit
Senior Heliman
Location: Thailand

My Posts This: Topic Forum

This is a good sign that Align keep upgrade Trex part. I guess in a few months Align may annouce CCPM mainframe for Trex then we can buy it and hopefully it must not expensive.

01-19-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

martinic
Veteran
Location: NB, Canada

My Posts This: Topic Forum

Quote
Martinic, he did not say $3, but said $3x ...

Thanks dnam - my mistake - I was reading too quickly.

$32.40 is an interesting price point. So assuming their CCPM frame is close to the price of the stock model we could be looking at ~$50 for a CCPM conversion kit including frame, swash and new servo links. It will be revealing to see how it compares to the higher-end MH swash and TBA CF frame. Maybe by then we'll have an optimal motor combination to go with it...

01-19-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

Gary Jenkins
Elite Veteran
Location: Wilmington, DE

My Posts This: Topic Forum

$32.00 is a lot better than the other after market part prices of around $80.

01-19-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

tauscnc
Veteran
Location: Joliet IL

My Posts This: Topic Forum

Alright, a bling part we can afford

$32 buck for a $165 kit comes too....ahhhh about 19% while the others at $85 are in the $50% range.

Wow. While I machine for fun and agree that making a swash is tough, half the price of the entire kit for one part is a lot, IMO. I guess it really comes down to one thing, what is the public willling to pay. Me, the $32 bucks heheee.

taus
www.cuttingedgecnc.com

01-19-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE HOMEPAGE GALLERY

AeroSports
Senior Heliman
Location: NJ

My Posts This: Topic Forum

the $80 one weights 12g. it might be worth it for someone really tries to lose the weight. I will take the $32 one, as long as it is godd quality.

01-19-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE

balbs
Key Veteran
Location: Los Angeles, CA

My Posts This: Topic Forum

So, do you think Align is coming out with a plastic CCPM frame or go all out and make a CF version. Or, maybe a combination of both. I hope it's CF.

Balbs

01-19-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

AFrotorhead
Senior Heliman
Location: Las Vegas, NV

My Posts This: Topic Forum

Dear Align,
Please make aftermarket parts for MS Composit helis!!!