RunRyder RC Helicopter Topic - Century Airwolf 50 Size

RR Rated M For Mature

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 974 ONLINE 79 EVENTS SEARCH REGISTER START HERE

1 page

424 views

POST REPLY

HeliProz	.	Ron’s HeliProz South	.	MTA Hobbies
	.		.

Scale Model RC Helicopters > Century Airwolf 50 Size

1275mini
Veteran
Location: Wirral North West U.K.

My Posts This: Topic Forum

Any one know what servo to fit on the retracts ? i was going to fit some spare jr 591's i had laying around but they will not fit the century woodwork and i do not want to cut the woodwork as i think cutting will alter the setup of the retracts ! any ideas

Barry

12-05-2004 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

Copter Doctor
Elite Veteran
Location: daleville/ft.rucker, al- home of army aviation

My Posts This: Topic Forum

hmmm, are they std size??? if the fit is tight, there isnt any harm in cutting the hole a bit larger. just trim the inside in such a way that it doesnt shift the servo forward, backwards or to either side and you should be fine. there are several ways to go with this, either retract servos or std should work. it does require a little patience in setting it all up but works great when its done.

12-05-2004 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE HOMEPAGE GALLERY

1275mini
Veteran
Location: Wirral North West U.K.

My Posts This: Topic Forum

servos are std size airwolf woodwork is about 4-5mm to small in the length !

Barry

12-05-2004 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

marc28
Senior Heliman
Location: new york

My Posts This: Topic Forum

You need the mini servos for the retracts...I just completed this heli

12-05-2004 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

Scott Reed
Senior Heliman
Location: Southern California

My Posts This: Topic Forum

I Have The New 50 Size 222

I used 3 JR-3321 wing servos, and they fit perfect and work perfect..

The 3321 is now discontinued, but there is a new digital version, that uses the same case, but the number escapes me right now, so i'll have to edit it in here shortly..

I ran the three 3321s through a JR-Matchbox, so i have independent adjustments for reversing, neutral, and ATV on all three servos, using
ONLY one channel.

regards, Scott Reed

12-05-2004 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

rcadd1ct
Elite Veteran
Location: Richardson, Texas

My Posts This: Topic Forum

I used the expert sl680 retract in mine.

You need a reversing "Y" for the rear servos or mix in another channel.

I like using retract servos since they wont drain the battery on lock.

-RCA .......... Making Cuisinarts Fly!!!!!!!

12-05-2004 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

1 page

424 views

POST REPLY

Model Rectifier Corp	.	EDGE Rotorblades	.	ReadyHeli
	.		.

Scale Model RC Helicopters > Century Airwolf 50 Size

Print TOPIC

Advertisers

Subscribe to This Topic