03fomoco
Senior Heliman
Location: Tucson AZ
My Posts This: Topic Forum | Not sure where this goes since I am unsure of the problem. Here is the setup Freya, YS 80, GV-1, all futaba. When I am in idle up with the gov running and the stick in the center the engine will hunt for rpm. I have the head speed set at 1850 and it sounds like the engine is overspeeding and underspeeding in a pretty steady pattern. It is also noticeable but not as bad in a fast decent when the stick is centered. The throttle servo is a .16 sec. I can't imagine the servo being to slow. I checked all the dumb stuff sensor (97%) all setup menus. The one thing that seems to make a difference is changing the needle settings on the rich side. But the problem does not dissappear. Also YS 80 does have STII barrel installed.
-Dave
Sadly Sponsored by: VISA, MASTERCARD, and Bank of America |
