What does "CCPM" stand for its obviously an acronym? Also What makes a Radio "CCPM" compatable?

Cyclic Collective Pitch Mixing

A radio has to have the necessary software to be able to do CCPM, hence "CCPM compatible". If a radio is CCPM compatible, it can do CCPM.

Gravity Always Wins!

in other words an older radio would likely not be compatable?

try a search, there is loads of information on this topic

Depends...what radio are you referring to?

Gravity Always Wins!

I Have a JR X-347.

BUMP)))))

Some don’t realize it but Raptor’s, EVO’s, and others have mCCPM (mechanical CCPM). The advantage of the mechanical version is that it completely eliminates the collective/cyclic interaction that plagues the eCCPM systems.

... BTS

I got an E-Mail from JR suport. They said that My radio shold have a swash setting in the computer. Which mine doesn't. But they also said that its in there but they need to activate it. I think this is something I may have to do. So I can fly these new CP electrtic micro helis.
THANKS Everyone for your input I realy apreciate all of your thoughts.

Just noted a notes for active the CCPM function for X347 from Internet,

Do not know is it work or not / but the notes had mention very clear that if operate it is a wrong way, it will damage the original program !!!

Consider about the DANGEROUS !!!!!!

IF you use this procedure, be very careful as to watch what you are doing, you can really mess up the radio!

Here goes.
- Start with flipping your GEAR switch to the rear position.
- Turn on the radio with the two UP/ Down keys depressed (just as if you were going to reselect another model).
-Scroll to model RESET.
-Now pull the gear switch forward and then press the DATA + key , then push the gear switch back and press the DATA - key. Repeat this fairly quicky witout stumbling! You must develop a rhythum (if you will) and continue to do this untill you hear a BEEP. If you don't hear the beep after a couple of minutes, start over and try again untill you get the BEEP.
- When you get the beep, the screen will change.
- Use one of the two UP/Down buttons to scroll to the screen that says BATTERY.
-Push the CH button untill you see "swash" or "swsmx" and you will see that it is inhibited. Hit the DATA + or - key to activate the swash mix function.
- now hit the two UP/Down keys to go back to the regular screen.
-You can now see the 3 different swash mix types in your set up menu.

Hope this helps!!!

PLEASE BE CAREFUL DOING THIS!!!!! Don't be tempted to wander around in this mode, there is a lot of stuff you can change!!