RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 710 ONLINE 82 EVENTS SEARCH REGISTER  START HERE
 
1 page264 viewsPOST REPLY
Futaba-RC . Boca Bearings . XHELI.COM

.
.
e-Century Hummingbird - Swift > GWS 6ch RX For Futaba and CCPM CP hummer
 
 
zoom
Elite Veteran
Location: Galveston, Texas

My Posts This: Topic  Forum		1. aileron
2. elevator
3. throttle
4. rudder/gyro
5. gyro remote signal wire ( GY 401)
6. battery

Himax 2015-4100, phoenix 10, EDP 50, pixie 7p
Lipo 11.1v 3s 1200mah


1. If this is the case, how will I plug up all three servos for CCPM on the new hummer?

2. Do I need an 8ch rx?


Help me with this one somebody

Predator, Raptor 30, TRex CCPM 450TH, 3D Pro 400F
04-21-2004 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Yukonho
Senior Heliman
Location: Montreal, Quebec, Canada

My Posts This: Topic  Forum		The battery goes in through the throttle channel.
For your setup you only need 6 channels.
co
04-21-2004 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
turk182
Heliman
Location: Phoenix, AZ USA

My Posts This: Topic  Forum		You will want channel 6, the BEC (Battery Eliminator Circuit) in the Phoenix 10 will supply power to everything. Channel 6 will supply your pitch.

Ted
04-21-2004 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
pbmax
Key Veteran
Location: Olympia, WA - USA

My Posts This: Topic  Forum		Yup, pitch on ch6. Also, you might look at getting a TX with a 5-point throttle / pitch curve like the Hitec Eclipse 7 or the Futaba 7C. The point here is to manage your head speed so it's constant and high. When you give it positive pitch, you don't want the motor bogging down.

You might be able to achieve this with the phoenix 10's govenor mode, but I didn't have much success with it. I've heard people say that the new firmware fixes the nasty pulsing problems I ran into with it, so it might work great for you.

I just got my Eclipse 7 last week and I'm extremely happy with it

pbmax
04-21-2004 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
zoom
Elite Veteran
Location: Galveston, Texas

My Posts This: Topic  Forum		i am going to use my 9CH

Predator, Raptor 30, TRex CCPM 450TH, 3D Pro 400F
04-21-2004 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
pbmax
Key Veteran
Location: Olympia, WA - USA

My Posts This: Topic  Forum		Haha, I mis-read RX as TX in #2 on in your post

No, I can't see why you'd need a 8ch RX unless you're gunna do retracts, adjustable gyro, and then some.

pbmax
04-21-2004 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
zoom
Elite Veteran
Location: Galveston, Texas

My Posts This: Topic  Forum		that's the thing, i want to be able to run the 401 and plug up that yellow remote signal plug on the 401. that way i'll be able to adjust the gyro from my 9C.

Predator, Raptor 30, TRex CCPM 450TH, 3D Pro 400F
04-21-2004 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
pbmax
Key Veteran
Location: Olympia, WA - USA

My Posts This: Topic  Forum		A 6ch RX is fine if all you're doing is adjustable gyro gain.

pbmax
04-21-2004 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page264 viewsPOST REPLY
Advantage Hobby . Revolution Models . CarbonXtreme

.
.
e-Century Hummingbird - Swift > GWS 6ch RX For Futaba and CCPM CP hummer
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, March 22 - 1:56 pm - Copyright © 2000 - 2010 runryder.com | email | link to rr | START HERE | NF