Here ya go paul,
The glow wire is attached onto the canopy by drilling 1/16 holes every couple inches then lacing it in place with dental floss, then hit it with a bit of CA, works pretty good. Picked that up from a few guys here that do it that way.
I taped my battery and the glow wire driver to the bottom of the canopy, i like it because it you have access to the switch and bat, but the tape was loosening up a bit after a few flights so i'll be adding a few tie wraps or velcro bands to secure it a littel better.
Most folks also add a few glow sticks. One to the tail fin, and a couple to the skids, so you can still see what you are doing if the glow wires were to quit on you. being able to see the tail seems to be most important.