RunRyder RC Helicopter - ka6fty's gallery

RR Rated M For Mature

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 754 ONLINE 18 EVENTS SEARCH REGISTER START HERE

ka6fty's gallery

The Butterscotch Rocket

AP2000I and 12Z Setup

I have mine set up the following way: Switch C: Down = Cal, Middle = Off, Up = Right slider. Slider varies gain from OFF to 70%, with the detent being 30% gain.

Linkage Menu - Function - Channel 8	Linkage Menu - Servo Reverse - Channel 8	Linkage Menu - End Point - Channel 8	Model Menu - AFR - Aux1 - Page 1

Model Menu - AFR - Aux1 - Page 2	Model Menu - Prog Mixes - Page 1 - Select Mixing 1	Model Menu - Prog Mixes - Page 1	Model Menu - Prog Mixes - Page 2

Model Menu - Prog Mixes - Page 3	Set Make sure and set the on/off point for the mix in page 3

"Like New" Spectra G

Origional text from the ad: spectra g with 231 and cent v2 pipe and tempast SOLD This is like new only 1/2 gallon's thought it. Come's with heli motor and pipe. Also has servo supports. Also K&N air filter. With a tocan sam canopy the hatori in pix has been upgraded to the century v2 pipe

What I received

Looks like Sam bumped his nose!	And tore his ear out!	fuel tubing, Wire ties, and some heat shrink. Just like new!	Skid plastic melted due to high frequency vibration.

The guide dowels were bent causing the washout unit to bind	Like new factory helicoils	"One of these things is not like the others"	No shortage of bent hardware here

Carb spacer with the inserts pulled through block. New Z-RC spacer.	Bill from hanson's showing the crank was bent

GV-1 on a gasser

GV-1 Sensor mounted to G-231 case.

Spectra G - Extreme Head

Spectra G - Tempest Head

Generator Project. Installed on Spectra G Tempest

Fury Expert - YS80

Great flying Heli.	Rolling on the way up	Over the top	Rolling on the way down

Old Stuff

X-Cell ST - Now set up for nite flying	Vario Benzin	Vario on the approach